s

Major components of a pinch valve consists of body and a sleeve. The sleeve will contain the flow media and isolate it from the environment hence reducing contamination to the environment. Generally used for slurries or processes with entrained solids, because the flexible sleeve allows the valve to close droptight around solids—solids that would typically be trapped by the seat or stuck in crevices in globe, diaphragm, butterfly, gate, or ball valves. The sleeve material can be selected upon the corrosiveness and abrasiveness of the flow media, a suitable synthetic polymer can be chosen. A pinch valve http://www.corrosion-resistant-valve...nch-valve.html may be the best type of valve for flow control application if the operation temperature is within the limit of the polymer.

PTFE lined pipe is highly corrosion resistant and our lined equipment is used to convey the most corrosive and toxic chemicals in manufacturing plants around the world. We're the China's largest manufacturer of PTFE lined pipe and PTFE lined fittings. PTFE lined pipe fittings include PTFE Lined Elbows,PTFE Bellows,PTFE Lined Tee,PTFE Lined Reducer

Pinch valve is a full bore or fully ported type of control valve which presents no obstruction to flow passage. There are a few types of pinch valves based upon application.pinch valve is the most practical solution for all kinds of flow control applications including abrasive, corrosive and fibrous products, granules, powders and slurries. Pinch valves http://www.corrosion-resistant-valve...nch-valve.html are made up of only a few parts, with the flexible sleeve being the most important item.

PTFE lined pipe is highly corrosion resistant and our lined equipment is used to convey the most corrosive and toxic chemicals in manufacturing plants around the world. We're the China's largest manufacturer of PTFE lined pipe and PTFE lined fittings. PTFE lined pipe fittings include PTFE Lined Elbows,PTFE Bellows,PTFE Lined Tee,PTFE Lined Reducer

PTFE lined pipe is highly corrosion resistant and our lined equipment is used to convey the most corrosive and toxic chemicals in manufacturing plants around the world. We're the China's largest manufacturer of PTFE lined pipe and PTFE lined fittings. PTFE lined pipe fittings include PTFE Lined Elbows,PTFE Bellows,PTFE Lined Tee,PTFE Lined Reducer

Pinch Valve straight-through flow: reduces cell shear eases draining and cleaning provides high Cv, uniform flow. Boreline seals virtually eliminate entrapment areas. Spring-loaded stem controls closing force, enhancing pinch tube element service life. Valve offers excellent drainability when properly oriented. Compact, three-piece construction allows space-efficient system layout. Lightweight (1.75 lb [0.79 kg]), high-strength PEEK body provides low thermal conductivity and resists corrosion. Valve offers secondary packing/body seal with telltale leakage detection port. Manual and pneumatic actuation available.

If charge build up within pipework caused by the flow of non-conducting liquids (such as solvents) over virgin PTFE is a problem, the first step to solving the problem can be the use of antistatic PTFE lined pipe The details of this material and its properties are dealt with more fully elsewhere. For the purposes of this discussion, it should be said that the antistatic version of PTFE will allow static charge to slowly migrate from the inner surface of the PTFE to the outer surface of the PTFE, and from there it will contact the steel outer housing

Pinch valve is a full bore or fully ported type of control valve which presents no obstruction to flow passage. There are a few types of pinch valves based upon application.pinch valve is the most practical solution for all kinds of flow control applications including abrasive, corrosive and fibrous products, granules, powders and slurries. Pinch valves http://www.corrosion-resistant-valve...nch-valve.html are made up of only a few parts, with the flexible sleeve being the most important item.

Every Swagelok pinch valve is factory tested with nitrogen at its maximum pressure rating to a maximum leak rate of 0.04 std cm3/min at the seat and ****************l. Body seals are tested with helium at 10 psig (0.68 bar) to a maximum leak rate of 1 × 10?C5 std cm3/s.

PTFE lined pipe is highly corrosion resistant and our lined equipment is used to convey the most corrosive and toxic chemicals in manufacturing plants around the world. We're the China's largest manufacturer of PTFE lined pipe and PTFE lined fittings. PTFE lined pipe fittings include PTFE Lined Elbows,PTFE Bellows,PTFE Lined Tee,PTFE Lined Reducer